I like to do a little graphical application every once in a while just to stay in practice. There are a lot of concepts from trigonometry that have to be applied. Debugging graphics is sometimes a tricky affair, because if you don't do the right thing then you might wind up with nothing but a blank screen, or a line might appear wildly out of place. Finding the angles required remembering what sines and cotangents and such represent. (SOH CAH TOA! That's one that never leaves your memory, but I got sin and asin mixed up for a while.)

I also had to fudge the numbers a little bit. For instance, one angle might be 70.14 and another might be 50.34. The third angle should be 59.52. However, if you reduce those to one significant figure, you find that 70.1+50.3+59.5 = 179.9. So I had to fake the third angle (a3) as displaying 180-a1-a2.

The hardest challenge came after I decided to change "nearly" right angles into true right angles. Notice that if you drag one corner so that it forms an angle between 80 and 100 degrees, it will automatically snap to the correct position so that it is 90 degrees. I had to put some thought into making that work, and here's the solution I wound up with.

- Write an expression of the line segment opposite the point being moved.
- Find a vector perpendicular to that line.
- Project the moved point along that vector to find where it intersects the opposite segment.
- Find the actual distance that the point must be from the segment in order to make a 90 degree angle.
- Move the point there.

I had originally used only a "Point" class and a "Triangle" class to represent the problem space; I soon realized I needed a "Vector" class as well (one which could be used to offset a point, normalized, reversed, or made perpendicular to another vector). Then I had to make yet another class, "Line," in order to properly calculate where intersections can be found. I borrowed a lot from this page, and found out just how long it had been since I needed to do that math -- I had a totally incorrect idea of how a line formula is expressed.

Basically the key to correcting your math mistakes -- and I made a lot! -- is to create either a printout or a visual representation at every step. For instance: I think I've normalized the vector correctly, better print out the coordinates and make sure the length is really 1. I need to draw an extra line to make sure it really goes through this point. I need to draw an extra point to make sure it really intersects that line. Do these two lines LOOK perpendicular to me? And so on.

If I had remembered the math better then some of this rigor wouldn't have been necessary. But really, caution and constant testing while coding eliminates the need to be a perfect math whiz. Coding is both theoretical and experimental, you see.